The data given should be used cautiously, and as a guide only. 1 (kerosene) No.
The nuances of particle solubility in a given solvent should ultimately be investigated by the experimenter during assay optimization and this guide is not a substitute for bench top evaluation.Adapted from: Brandrup, J., and Our products can be exposed to a huge variety of chemicals.
Trigonox 501-CS40, 1,2,4,5,7,8-Hexoxonane, 3,6,9-trimethyl-3,6,9-tris(Et and Pr) derivs, 40% solution in odorless mineral spirits, CAS 1613243-54-1, Organic peroxide, Initiator for the production of controlled rheology polypropylene (CR-PP). Mineral spirits Naphtha (non aromatic) Naphtha Solvent Stoddard solvent VM&P Oils Absorption oil Clarified oil Crude oil Diesel oil Fuel oil No. Leverage custom graphs to visualise what matters. Introducing the Digital Product Selector, a better way to find your fit. 4 No. resistance of the specific thermoplastics we use in the construction of our products, to common chemicals. 2 No. It is produced via chain-growth polymerization from the monomer propylene..
Linseed oil is no good for EPDM, rubber, and neoprene; Ethyl alcohol (the kind you can drink) will dissolve polyurethane but is pretty much OK for everything else; Methyl (wood) alcohol (the kind that makes you blind) is no good for ABS plastic and polyurethane 5 No. 6 Lubricating oil Mineral oil Mineral seal oil Motor oil Penetration oil Range oil Road oil Spindle oil Spray oil Transformer oil Turbine oil
POLYPROPYLENE . Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. Chemical resistance of plastics to Mineral oil @ 20°C is depending on their ability to keep properties when exposed to this reagent. Mineral spirits (aka paint thinner) are no good for ABS plastic, HDPE, and EPDM.
O U The data you need, in multiple formats.
Mineral oil S U Molasses S Reagent 70 °°°F (21 °C) 140 °°°F (60 °C) 212 °°°F (100 °°°°C) Motor oil S S Mustard Paste S N Naphtha S S Naphthalene S S S Neat’s Foot Oil S Nickel chloride S S Nickel nitrate S S O Nickel sulfate S S S Nitric acid (10%) S S S Nitric acid, conc.
The data table below is an application guide, and indicates the . Manage collections. Share. Polypropylene is generally high in chemical resistance but should not be used in contact with halogenated and aromatic hydrocarbons or strong oxidizing acids.
The Digital Product Selector caters to your industry and helps you find your fit. Polypropylene belongs to the group of polyolefins and is partially crystalline and non-polar.Its properties are similar to polyethylene, but it is slightly harder and more heat resistant. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation.
CHEMICAL COMPATIBILITY CHART .
Chemical Compatibility Guide Polypropylene This chart is only meant to be used as a guide for chemical resistance.
Click to download pdf version.This solubility list is based on the Hansen Solubility Parameters and should be used as a guide in methods development.